The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
The First Degree Newport rower utilises water resistance for a more effective workout that’s low impact, so it’s gentle on the body. You’ll focus on building up all the major muscle groups as you use a machine that offers a very realistic rowing experience.To increase resistance flip the valve control to add more water to the paddle water tank. To decrease resistance, remove water from the tank and enjoy a less challenging stroke for the cool down or warm up a portion of your workout. The tank on the Newport can hold a minimum of nine litres of water and a maximum of seventeen litres.
The machine is well constructed for a consumer device. The control panel does not accurately measure distance. It's off tenfold. I've contacted the manufacture about the issue and first I was told it should only be used for comparison purposes, then I was told it would be too expensive to provide a product that didn't show 1 km as 0.1km. Yes, these are ridiculous excuses.

WaterRower For over 20 years, WaterRower has been providing the world with rowing machines that demonstrate the physical and physi...ological benefits of rowing. Rowing is a complete aerobic exercise routine that works 84 percent of muscle mass and gives maximum results - you burn more calories in less time and have fun, too. Rowing combines aerobic exercise with resistance all in a smooth, rhythmic exercise. It's suitable for people of all shapes and sizes and is easy on the joints.WaterRower is committed to being environmentally conscious. Their rowing machines are made using only the world's finest hardwoods specially selected from replenishable sources where more wood is planted than harvested. Because WaterRower machines are people- powered, no electricity is required! WaterRower rowing machines help you burn calories, tone muscles, and be kind to the environment. read more
The WaterRower Natural is handcrafted from solid Ash wood, finished with a honey oak stain and danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase
The WaterRower Natural rowing machine is handcrafted in solid ash wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Natural, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.
The first known "modern" rowing races began from competition among the professional watermen in the United Kingdom that provided ferry and taxi service on the River Thames in London. Prizes for wager races were often offered by the London Guilds and Livery Companies or wealthy owners of riverside houses.[10] The oldest surviving such race, Doggett's Coat and Badge was first contested in 1715 and is still held annually from London Bridge to Chelsea.[12] During the 19th century these races were to become numerous and popular, attracting large crowds. Prize matches amongst professionals similarly became popular on other rivers throughout Great Britain in the 19th century, notably on the Tyne. In America, the earliest known race dates back to 1756 in New York, when a pettiauger defeated a Cape Cod whaleboat in a race.[13]
WaterRower (UK) Ltd was formed in 1991 to market and distribute the WaterRower throughout Europe under license to WaterRower Inc. Initially with offices in Fulham, London, a 1993 agreement provided WaterRower (UK) Ltd with the additional right to manufacture the WaterRower for Europe. Workshops were established in the idyllic stately home of the Earl and Countess of Sandwich, Mapperton Manor 

The A1 S4 Driftwood by WaterRower delivers a total body workout, caters to fitness goals and exercise requirements. This rower is ...crafted out of fine-quality driftwood with an aluminum monorail. It is perfect for home or gym use and has a maximum user weight capacity of 375 pounds. The A1 S4 Driftwoood boasts features such as the WaterRower patented WaterFlywheel that gives life-like water rowing experience, a unique self-regulating resistance with infinite variable which suits any user, contoured seat with wheels that glide along the rail and comfortable rowing handles. It also comes with an S4 monitor that shows time per 2 or 500 kilometers, calories burned per hour, distance covered and total time of workouts. Maintenance of this rower is minimal. Simply add a purification tablet every 3-6 months. Tablets come with the package. When not in use, store the A1 S4 Driftwood vertically against a wall or in a closet. Buy your very own high-quality WaterRower Rowing Machine from Dazadi and get free shipping with every purchase. *WATER ROWER FOR HOME AND GYM USE - Crafted out of high-quality driftwood with aluminum monorail with no impact and non-load bearing, making it perfect for users with joint problems. Targets 84% of all major muscle areas like the arms, legs, back, shoulders, chest, core, etc. Water rower dimensions: 83 L x 22.5 W x 22.5 H Inches / Weight: 110 Pounds*LIFE-LIKE WATER ROWING EXPERIENCE - Features patented WaterFlywheel, unique self-regulating resistance, ergonomic seat and handles. Suits any user without need for adjustments. Maximum user weight: 375 Pounds. *TRACK YOUR PROGRESS - Water Rower comes with an intelligent S4 monitor that shows time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts.*LOW MAINTENANCE AND SPACE EFFICIENT - This water rowing machine does not require lubrication or maintenance. User simply needs to add a purification tablet in the water every 3-6 months (tablets come with the package). When not in use, tip vertically against a wall or store in closet conveniently. read more


It provides a pretty impressive cardiovascular workout that will leave you feeling rejuvenated and empowered at the same time. This is a water resistance model that allows you to smoothly cut through water using all the major muscle groups, without putting unnecessary strain on the lower back and joints. This is the perfect workout for users who cannot participate in high impact workouts.
Of the four types of rowing machines or ergometers, water rowers are best at reproducing the sensation of on-water rowing. Their stroke cycles hold true to the dynamics of real paddling, and each stroke is punctuated with a splash! Water rowers have sliding seats to allow full-body cardiovascular workouts. (With cheaper rowing machines, in contrast, the seats don’t move.) These fitness machines tend to feature high quality parts and can last a lifetime.
The machine was easy to put together and worked well mechanically. The problem is the electronic monitor. The strokes/min registered as double the actual pace, and the distance registered as 1/10th the actual distance. I contacted customer support via email and their response was slow and inadequate. I am returning the machine and plan to buy a WaterRower.

The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
WaterRower Dimensions: 82" x 22" x 28" / Weight: 114 Lbs (With Water) / Storage Dimensions: 28" x 22" x 82" (Easily Store It On En...d)Built For Home Use & Practically Maintenance Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade Of Kiln Dried Harwood For Better Wood Strength & Performance; Has Honey Oak Finish That Goes Well W/ Other Home FurnitureBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration) read more

This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.


A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
In addition to its natural, fluid resistance, the Elite Wave Water Rowing Machine features many performance upgrades that push you to row harder, faster and longer. When mounting the rower, you will immediately notice the ease and customization of the footplates and straps. The footplates, which accommodate a wide range of foot sizes with their adjustable length, feature a heel strap that secures the feet while also allowing the heel to rise higher for a wider range of motion. There are also quick-adjust straps with finger loops so you can quickly secure your feet – even in the middle of the workout. Once you push, extend and bend, the seat glides atop the aluminum rowing beam, providing a smoother workout.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
The benefit of a water resistance rower is that it most closely simulates a boat moving through water. Rowing resistance comes from the effect of fluid drag acting on the boat; in other words, resistance increases according to stroke rate. The patented WaterFlywheel emulates this naturally self-paced benefit of rowing. This is a workout with immediate benefits, regardless of your level of experience! Please also note that you can adjust the workout intensity by changing the amount of water in the tank. The more water, the higher the effort level required.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
×