Storage is also a plus point for the Waterrower series as they are all designed to stand upright with the tank acting as ballast for stability. In this position they only take up around two square feet. Again, great if you are planning on training in the living room. However, if you have small children, I would advise fixing the top to the wall with a hook and strap.
The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.