The WaterRower Classic Rower is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
From a fitness perspective, the WaterRower Natural works 84 percent of your muscle mass, helping tone and strengthen your muscles while burning far more calories than most other aerobic machines. The exercise is also low impact, as it removes all the body weight from the ankles, knees, and hips, but still moves the limbs and joints through a full range of motion--from completely extended to completely contracted.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
The OMNI T1X next-generation, cutting-edge, gold standard touring class open water and coastal rowing shell is available for purchase spring 2015!   The new OMNI T1X is 19' long with significant design updates to row and track well on flat water as well as be the ultimate performance and safe rowing shell rowing through chop, wake and swells found on magnificent large bodies of water.   We've modeled the OMNI T1X after the best features of U.S. manufactured open water shells and built-in the efficient, self-bailing open transom found in all European built Coastal Rowing Shells. The OMNI T1X is a versatile, adjustable shell accommodating both tall and short rowers of varying weights.  You'll find the slightly uplifted bow shape slicing through chop with ease, the self-bailing open transom efficiently shedding water against the roughest conditions; the long, tapered built-in keel tracking well and the hull shape & stabiity necessary to catch, lock-on and drive past the competition in the roughest of open water stretches. Meeting the maximum length for Open Water Competition Touring Class shells at 19', the new OMNI T1X is light, stiff and ready to deliver optimal performance for our most competitive endurance rowers and a boat to last a life-time for recreation and fitness rowers.  

In the starting position, the knees should be bent, with the shoulders and arms extended forward and the shins held vertically. Begin rowing by pushing both feet against the row machine’s platform and straighten the legs until they’re slightly bent. Pull the paddle towards you, using bent elbows as you slightly lean back while focusing on keeping your back straight. This type of motion should be both continuous and fluid.

Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. The WaterRower's patented WaterFlywheel has been designed to emulate the exact dynamics as a boat moving through water; the objective of the exercise of rowing.
This is a company known for quality as well as stewardship for over 20 years. WaterRower hand-crafts their rowing machines to be more than just a workout machine, but also a work of art as well. Also, WaterRower is and has been on the cutting edge of environmental sustainability with their use of the best hardwoods coming from renewable forests. We’re in excellent hands here.

There are various air rower or water rower techniques, but the most basic one is by starting at the back stroke, the knees should almost be completely straight prior to squeezing the shoulder blades together. Then you pull its handle to the sternum. The back of your body should naturally stay in its arched position when doing the whole movement. Do not forget to take a record of the distance you have made after every session. Some people even take it as far as uploading their results online and see how they are ranked from other people who are also doing the same. You clean learn more about rowing machine technique on this page.

Now back to the aesthetics, this version of WaterRower’s natural wood line of rowers comes in beautiful Black Walnut, which the company chose for its superior sound and vibration absorption. It’s hand-made in the USA and comes with excellent warranties and customer service. Overall, WaterRower is known for the quality of their rowing machines and the Classic is no exception.  And if you do want to get this rower just as an attractive conversation piece, it easily stores upright against a wall.  That said, we strongly recommend using The WaterRower Classic Rowing Machine for fitness, not just eye-candy.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.

Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge Rower will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue.

WaterRower Dimensions: 82.25" x 22.25" x 20" / Weight: 103.5 Lbs (W/ 17 Liters Water)Built For Home Use & Practically Maintenance ...Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ Ash Wood & Aluminum Mono Rail, Along W/ Danish Oil & Urethane Finish For Better Wood Performance/StrengthBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty - Home Use Only (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration) read more
The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.
Get the WaterRower S1 Indoor Rowing Machine w/ S4 Monitor for your home gym! This exercise equipment targets compound muscles such... as arms, legs, back, and glutes. It's the perfect workout as if you're actually driving a boat with oars. Its construction features a stainless steel makeup with brushed finish--giving it high durability. Moreover, it boasts a patented water flywheel responsible for its natural rowing dynamic. Enjoy self-regulating resistance levels--making it suitable for individuals with joint concerns, along with little maintenance required by replacing the chlorine tablet every 2-6 months. Other specifications include maximum user weight and height of 1000 pounds and 38-inch inseam. What's more, it comes with the S4 performance monitor that displays intensity, Kcalories per hour, Strokerate, Heartrate, and more! So avail a WaterRower S1 Indoor Rowing Machine w/ S4 Monitor today! read more
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
The first known "modern" rowing races began from competition among the professional watermen in the United Kingdom that provided ferry and taxi service on the River Thames in London. Prizes for wager races were often offered by the London Guilds and Livery Companies or wealthy owners of riverside houses.[10] The oldest surviving such race, Doggett's Coat and Badge was first contested in 1715 and is still held annually from London Bridge to Chelsea.[12] During the 19th century these races were to become numerous and popular, attracting large crowds. Prize matches amongst professionals similarly became popular on other rivers throughout Great Britain in the 19th century, notably on the Tyne. In America, the earliest known race dates back to 1756 in New York, when a pettiauger defeated a Cape Cod whaleboat in a race.[13]
At the collegiate level (in the United States), the lightweight weight requirements can be different depending on competitive season. For fall regattas (typically head races), the lightweight cutoff for men is 165.0 lb. and 135.0 lb. for women. In the spring season (typically sprint races), the lightweight cutoff for men is 160.0 lb., with a boat average of 155.0 lb. for the crew; for women, the lightweight cutoff is 130.0 lb.[48]
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
The model E’s seat stands 6 inches higher. And while the model D’s monitor rests on an adjustable arm, the E’s sits on unbending metal. These few technical differences do nothing to impact ride feel. We recommend the $200-cheaper model D as the best buy, but the Concept 2 E will appeal to anyone who values a higher seat and more solid construction.
WaterRower Rowing Machines offer a pleasant rowing exercise while holding true to the dynamics of on-water rowing; burn up to 1000 calories an hour and work up to 84 percent of your muscle mass! Rowing provides an effective, high-intensity, cardio workout, while maintaining a low-impact to the joints. Workout at your own pace as the WaterFlyWheel's self-regulating resistance dynamically adjusts to each of your strokes. Unlike common ergometers, to change resistance on a WaterRower rowing machine you simply row harder!
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.

Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.

×