The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
The proper ratio of effort is about 75 percent lower body and 25 percent upper body. Ensure you’re hitting that by driving through your legs and keeping your hands relaxed. Posture plays a big part, too. Concept 2 recommends imagining your upright profile at noon and tilting from the 11 o’clock position (drive) to the 1 o’clock position (recovery).
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.

Rowing machines are an excellent and effective way to get exercise and muscle tone, thanks to their sliding seat and repetitive rowing motion, that allows the engagement of almost all major muscle groups, without the need for a lot of gear or a lot of space compared to most workout machines. Long renowned as the perfect aerobic exercise, the WaterRower is unmatched with its ability to burn calories within a perceived level of exertion. Low impact and body weight bearing, the WaterRower is perfect for any user, and each one is built from beautiful, rich wood that is sourced only from sustainably-managed forests where growth exceeds removal by 229%.

The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
WaterRower Dimensions: 83'' x 22'' x 21'' / Weight: 108 Lbs (At Minimum Water Level)Built For Light Commercial Use & Practically M...aintenance Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ Kiln Dried Harwood; Danish Oil & Urethane Finish For Better Wood Performance/Strength & Cozy Feel To Your GymBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration)Comes W/ The S4 Performance Monitor For QuickStart Of Functions And Displays Intensity, Kcalories Per Hour, Strokerate, Heartrate, And More!Storage Dimensions: 21'' x 22'' x 83'' (Easily Store It On End)Entry Height Is At 12'' (At 20'' W/ Optional Hi-Rise Adaptor)Noise/Intrusion Levels: Soothing & Relaxing/Minimal read more

This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.


Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.

The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.
Please Note: If you select Express or Expedited shipping, your order must be received and credit must be approved by 12:30 p.m. EST, or it may not be processed until the next business day. Expedited shipping is available for select products. You can view complete shipping options for your product in your shopping cart. The estimated delivery date for your order will be provided on the order review page prior to completing the order.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.


The model E’s seat stands 6 inches higher. And while the model D’s monitor rests on an adjustable arm, the E’s sits on unbending metal. These few technical differences do nothing to impact ride feel. We recommend the $200-cheaper model D as the best buy, but the Concept 2 E will appeal to anyone who values a higher seat and more solid construction.
The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!
Storage is also a plus point for the Waterrower series as they are all designed to stand upright with the tank acting as ballast for stability. In this position they only take up around two square feet. Again, great if you are planning on training in the living room. However, if you have small children, I would advise fixing the top to the wall with a hook and strap.
The WaterRower Classic is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.

As I mentioned, the rowing experience with the WaterRower is amazing. I bought the rower for myself, but my wife was curious and decided to try it out. She loves it, and now rows almost daily. We have a treadmill that neither of us has used since we started rowing - the WaterRower is a much better workout and much more enjoyable at the same time. It's easy to adjust the intensity, pace and duration of your exercise. There is nothing to change on the rower (* see note below), you just row harder or faster, adjust how far you lean forward and back during your stroke. The WaterRower will keep up with you as your fitness increases, all you need to do is keep throwing more and more at it.

The meter didn't work properly. It wasn't keeping the distance - we would row for 30 mins and wouldn't even be at 1km!!! And the strokes per minute was reading double strokes (which the company said was normal - huh?). Their customer service team was good and tried to make it work but we ended up returning it and spent the extra money to get a WaterRower and it is amazing!!!

This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.
The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.
×