Designed with an obsession for detail, the WaterRower Classic Rower is unmatched by any other fitness equipment. The overriding design philosophy of the WaterRower has achieved "beauty by simplicity". Every detail has been resolved to compliment the overall appearance and performance of the machine. Order your WaterRower Natural Ash Rower from FitnessZone.com today!
Wood is used for its unique visual appeal, but also for its ability to absorb sound vibration for smooth, quiet operation, as well as it's stable longevity. The Club edition rowing machine is handcrafted in solid ash wood and stained for color. It has been designed for high traffic or commercial areas, and its black rails have been styled to prevent scuffing. The other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model. Each machine has also been hand finished with Danish Oil and Urethane for protection.
The Waterrower has recently been made famous by Kevin Spacy as the rowing machine used in the ‘House of Cards’. It is a type of wooden rowing machine produced and manufactured by Waterrower Inc. in New England, USA. The rowers were designed by ex-US national team rower john Duke in the mid 1980’s and the company to manufacture them was established in 1988.
This type of calorie burn is better than what you would get from cycling or running, and it’s much gentler on the body. You can also position your hands differently in order to work new muscle groups in your lower and upper arms. Many people will be surprised to learn that rowing works the legs more than any other muscle group, but by switching up your rowing position, you can also focus on your abs, arms and shoulders for a total upper body workout that can provide impressive results just by working out a few times a week.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
With the smaller boats, specialist versions of the shells for sculling can be made lighter. The riggers in sculling apply the forces symmetrically to each side of the boat, whereas in sweep oared racing these forces are staggered alternately along the boat. The sweep oared boat has to be stiffer to handle these unmatched forces, so consequently requires more bracing and is usually heavier – a pair (2-) is usually a more robust boat than a double scull (2x) for example, and being heavier is also slower when used as a double scull. In theory this could also apply to the 4x and 8x, but most rowing clubs cannot afford to have a dedicated large hull which might be rarely used and instead generally opt for versatility in their fleet by using stronger shells which can be rigged for either sweep rowing or sculling. The symmetrical forces also make sculling more efficient than rowing: the double scull is faster than the coxless pair, and the quadruple scull is faster than the coxless four.
This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
×