In addition to this, certain crew members have other titles and roles. In an 8+ the stern pair are responsible for setting the stroke rate and rhythm for the rest of the boat to follow. The middle four (sometimes called the "engine room" or "power house") are usually the less technical, but more powerful rowers in the crew, whilst the bow pair are the more technical and generally regarded as the pair to set up the balance of the boat. They also have most influence on the line the boat steers.
When a product is listed as Pre-Order, such product is not yet in stock but is available for advanced purchase on our site, prior to the manufacturer's public release date. Pre-Order items are shipped once in stock and the public release date arrives. You will be notified of a product's updated status by email. The expected shipment time is listed on the Product Detail page.

At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.


If you’re new to rowing, start off slow and begin with a five to ten-minute warm-up, followed by a twenty-minute workout and five to ten additional minutes for the cool down. During your workout, if you continue to consistently row at the same speed, over a period of a few sessions you should begin to notice an increase in your endurance. For a more intense workout, you can try interval training with your rower. Start off each workout by rowing for five to ten minutes at the highest resistance level, as fast as you can. Next, for two to three minutes row slowly, at the lowest resistance setting. Do this for thirty to sixty minutes. Interval training has been incorporated in many different types of exercise from cardio to strength training, and it’s designed to give your metabolism a jolt and make your body improve its fat burning abilities
WaterRower Dimensions: 83" x 22" x 21" / Weight: 108 Lbs (At Minimum Water Level)Built For Home Use & Practically Maintenance Free..., Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ The Elegant & Desirable Solid Cherrywood That Darkens W/ AgeBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration) read more
The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.
Our Wooden Rowing Machines are Made in the USA using hardwood from only replenishable sources. We strive to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. 

Rowing is primarily a cardio workout, but it’s also more than that. Your heart rate is absolutely going to be climbing, but unlike a jog in the park, you might also be sore the next day. The rower requires you use your legs more than anything, and as we know, your quads, glutes, calves, and hamstrings are the biggest, most powerful muscles in your body. But you’re also pulling with your arms, shoulders, abs and engaging your back. That said, you’re not pulling as hard as you might with, say, a seated cable row machine at the gym. You don’t want to hurt your back, but you can engage them and this will help you get those muscles toned.
Get the WaterRower S1 Indoor Rowing Machine w/ S4 Monitor for your home gym! This exercise equipment targets compound muscles such... as arms, legs, back, and glutes. It's the perfect workout as if you're actually driving a boat with oars. Its construction features a stainless steel makeup with brushed finish--giving it high durability. Moreover, it boasts a patented water flywheel responsible for its natural rowing dynamic. Enjoy self-regulating resistance levels--making it suitable for individuals with joint concerns, along with little maintenance required by replacing the chlorine tablet every 2-6 months. Other specifications include maximum user weight and height of 1000 pounds and 38-inch inseam. What's more, it comes with the S4 performance monitor that displays intensity, Kcalories per hour, Strokerate, Heartrate, and more! So avail a WaterRower S1 Indoor Rowing Machine w/ S4 Monitor today! read more
The next time this happens try being more aggressive in leaning into the wave, but more importantly, you get your down-hill oar out of the water early. You can push the up-hill oar into the water to stablize the boat and prevent rolling too far in that direction. The water will be pulling your boat and oar tip in opposite directions here, so you won’t get trapped like you did before with the down-hill oar.
The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.

Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. The WaterRower's patented WaterFlywheel has been designed to emulate the exact dynamics as a boat moving through water; the objective of the exercise of rowing.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

We spent 42 hours on research, videography, and editing, to review the top picks for this wiki. These days, there’s no need to trek to a gym and pay costly membership fees if you want to get fit and stay healthy. Rowing machines provide a low-impact, full-body workout that targets almost every major muscle group. Once you choose the model that best fits your needs and find a convenient location somewhere in your home, there's nothing left to do but dip your oars. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best rowing machine on Amazon.


Not a lot to complain about on the Classic rower, but when searching for drawbacks of this rowing machine, the S4 Monitor is the one thing that occasionally comes up.  It’s rather basic and it isn’t backlit. Regardless, the monitor has all necessary tracking and features for getting an excellent workout, and in normal lighting there is no problem reading the display.


Meticulous care is taken in the creation of each rowing machine, ensures the WaterRower ethos of elegant design and American craftsmanship is evident whether in use or in storage. The soothing sound of our patented water resistance is both blissful and motivational. Creature-comforts can be found throughout, from the ergonomic handle, remarkably comfortable seat cushion and user-friendly performance monitor, you will find yourself searching out reasons to "sneak in" an added WaterRower workout into your day. When finished, the WaterRower stores with ease, while blending seamlessly into any environment, ensuring your design and décor values are never compromised by your fitness lifestyle.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.


Our Wooden Rowing Machines are Made in the USA using hardwood from only replenishable sources. We strive to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. 
×