Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
The Apollo Pro 2 water rower is a commercial grade, natural wood rowing machine, perfect for group training or high-end home gyms. This rower’s water resistant design, meditative motion and integrity of construction sets it apart from its competitors. Handcrafted from the finest quality American Ash wrapped around a stabilising steel frame, this steadfast indoor rower offers a standout performance even in the harshest of fitness applications.
Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.

The Classic Rowing Machine is designed is extremely easy to use. Additionally, it has a lot of comfort features in its design. It has an ergonomically shaped handle and padded heel rests that accommodate nearly everyone. Everything on the machine can be adjusted quickly. Because there are no movement parts, maintenance is minimal. Even the computer has a lot of one button operations, so the minute you have the rower assembled, you can get to work.
The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.

It's been nearly 30 years since John Duke, a former Yale University and USA National Team oarsman, set up a small shop in Rhode Island, USA to begin fine-tuning his innovative water-resistant rowing machine. With its beautiful design and unmatched feel, the WaterRower quickly gained a cult-like following of both on-water rowers and fitness enthusiasts that had found their perfect piece of workout equipment. As word spread of the new product that simulated the feel of on-water rowing, WaterRower transitioned from simply a one-off product found within the occasional boathouse to an established brand in both the rowing and fitness world.
In addition to its natural, fluid resistance, the Elite Wave Water Rowing Machine features many performance upgrades that push you to row harder, faster and longer. When mounting the rower, you will immediately notice the ease and customization of the footplates and straps. The footplates, which accommodate a wide range of foot sizes with their adjustable length, feature a heel strap that secures the feet while also allowing the heel to rise higher for a wider range of motion. There are also quick-adjust straps with finger loops so you can quickly secure your feet – even in the middle of the workout. Once you push, extend and bend, the seat glides atop the aluminum rowing beam, providing a smoother workout.
The resistance of your rowing machine impacts how it moves. Select from hydraulic and magnetic rowing resistance. Hydraulic rowers are typically more compact in size, while magnetic machines make little noise as they operate. Details like easy-to-reach tension knobs or buttons allow you to increase or decrease the intensity of your resistance as you train.
In the starting position, the knees should be bent, with the shoulders and arms extended forward and the shins held vertically. Begin rowing by pushing both feet against the row machine’s platform and straighten the legs until they’re slightly bent. Pull the paddle towards you, using bent elbows as you slightly lean back while focusing on keeping your back straight. This type of motion should be both continuous and fluid.
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
Rowing is unusual in the demands it places on competitors. The standard world championship race distance of 2,000 metres is long enough to have a large endurance element, but short enough (typically 5.5 to 7.5 minutes) to feel like a sprint. This means that rowers have some of the highest power outputs of athletes in any sport.[35] At the same time the motion involved in the sport compresses the rowers' lungs, limiting the amount of oxygen available to them. This requires rowers to tailor their breathing to the stroke, typically inhaling and exhaling twice per stroke, unlike most other sports such as cycling where competitors can breathe freely.
Row machine looks like it's a $600 unit. If you're in the market for a water rower I'd spend the money on the real Water Rower. I was wanting the Water Rower but after this poor experience I just want something that lasts and is warranted the longest. I purchased a concept2 that had arrived and is a much better quality unit. The computer is much better.
Water Rower Dimensions: 88" x 22" x 20" / Weight: 74 Lbs (Empty Tank), 111 Lbs (With Water); Maximum User Weight And Height: 700 L...bs & 38" InseamExercise Rower Features Aluminum Makeup With Powder-Coated Aluminum Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.

In deep water the speed (or velocity) of a water wave depends only on its wave length. Specifically, the speed is proportional to the square root of the wavelength. Thus, the longer the wave length, the faster the wave, or vice versa. The speed of a single wave is called the phase speed. Amazingly, the speed of a packet of waves (the group speed) is often not the same.
The advantages with air rowers is that there is smooth action; there is only small wear and tear to its mechanism; its automatic feature adjusts according to your rate of strokes; and there is a wide range of the resistance readily available in replicating the feel of rowing through the waters. The only disadvantage of this machine is that it tends to be noise indoors.

I would like to begin reviewing the screen. It’s quite simple to use. It doesn’t offer many things and that is what anticipated in a rowing machine that is under $150. As the LCD screen is too small, you need to keep yourself motivated some way or the other; music is a good way by the way. It’s only an easy screen that can show some basic information while you row such as the length of time you rowed in a single session and how much you’ve rowed. Additionally, it can give you a good idea about the approx. number of calories burned and strokes performed.  And that’s it. The LCD screen doesn’t show anything new. No preset applications are contained, and there is no way to save your workout information.

The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model. Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. s For reasons of ecology, all our woods are harvested from replenishable forests.
For a third option, you can look to hydraulic machines, which use pistons to generate resistance. Hydraulic rowers are quiet, and they also tend to be smaller and cheaper than other kinds of rowing machines, but you won’t get the same smooth rowing feel, or the consistency of resistance, that you would get with an air or water rower. What's more, reviewer after reviewer has found them unreliable and high-maintenance.
The Water Rower comes partly preassembled in two large boxes. The assembly instructions are reasonably good, and as long as you take your time and follow them carefully (read all the text) it takes about 45 minutes from opening the first box to trying it out. I bought bottles of distilled water to fill it, which made it easy to fill using the included funnel & hose.
In the 1950s- and 1960s, more sports coaches began to use rowing machines for training and assessment of athletes' performance. One such rower developed at this time was the Harrison-Cotton machine, the brainchild of John Harrison of Leichhardt Rowing Club in Sydney and Professor Frank Cotton, produced by Ted Curtain Engineering. This was the very first piece of equipment able to measure athletic power with great accuracy, and it also imitated the actual experience of rowing more closely than any previous rowing machine.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
The Verified Sustainable Hardwoods used for the WaterRower are sourced from the Appalachian Mountain region of the eastern United States, where planting rates exceed harvest rates by an average multiple of 2.29. The Appalachian Hardwood Timber resource includes more than 65.4 million acres in the eastern United States and provides the world with a bounty of the finest hardwood species.
Ergometer rowing machines (colloquially ergs or ergo) simulate the rowing action and provide a means of training on land when waterborne training is restricted, and of measuring rowing fitness. Ergometers do not simulate the lateral balance challenges, the exact resistance of water, or the exact motions of true rowing including the sweep of the oar handles. For that reason ergometer scores are generally not used as the sole selection criterion for crews (colloquially "ergs don't float"), and technique training is limited to the basic body position and movements. However, this action can still allow a comparable workout to those experienced on the water.
If you’re new to rowing, start off slow and begin with a five to ten-minute warm-up, followed by a twenty-minute workout and five to ten additional minutes for the cool down. During your workout, if you continue to consistently row at the same speed, over a period of a few sessions you should begin to notice an increase in your endurance. For a more intense workout, you can try interval training with your rower. Start off each workout by rowing for five to ten minutes at the highest resistance level, as fast as you can. Next, for two to three minutes row slowly, at the lowest resistance setting. Do this for thirty to sixty minutes. Interval training has been incorporated in many different types of exercise from cardio to strength training, and it’s designed to give your metabolism a jolt and make your body improve its fat burning abilities
Do you need a machine that folds up? If you've decided to avoid a water rower for space reasons, you may prefer a model that folds up for storage. Even better, some rowing machines have wheels fitted to them, so that once it's folded up, you can steer it to a storage space out of the way. You can find a foldable design in many magnetic and some air rowers.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
Outside of resistance type, we found the number-one arbiter of ride feel to be cord quality. Water ergometers tend to employ nylon cords, while air ergometers feature metal chains — a durability factor we anticipated would result in our favoring air. But while all three water rowers aced our expectation of smooth, high-tension strokes, perfecting the chain seems to be more difficult: Some tug with just a slight rumble, others feature bouncy, grinding chains that are incredibly loud, something akin to angry snoring. As for nylon, the best wind and unwind like elastic silk — no slack, no sound, no catching, just perfectly even tension throughout the stroke.
Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
The benefit of a water resistance rower is that it most closely simulates a boat moving through water. Rowing resistance comes from the effect of fluid drag acting on the boat; in other words, resistance increases according to stroke rate. The patented WaterFlywheel emulates this naturally self-paced benefit of rowing. This is a workout with immediate benefits, regardless of your level of experience! Please also note that you can adjust the workout intensity by changing the amount of water in the tank. The more water, the higher the effort level required.
On a rowing machine, you don’t want to be wearing clothes that are too baggy as the fabric can get caught between the seat and the beam it slides on.  It’s not a disaster if that happens, but it can get annoying if your shorts keep getting caught there while you’re trying to get a serious workout.   It’s better to wear shorter, tighter-fitting shorts (nothing ridiculous), but just enough to ensure it doesn’t the material doesn’t hang down.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
A feature of the end of twentieth century rowing was the development of non-olympic multicrew racing boats, typically fixed seat-gigs, pilot boats and in Finland church- or longboats. The most usual craft in races held around the coasts of Britain during summer months is the Cornish pilot gig, most typically in the south-west, with crews of 6 from local towns and races of varying distances. The Cornish pilot gig was designed and built to ferry harbour and river pilots to and from ships in fierce coastal waters. The boat needed to be stable and fast with the large crew hence making it ideal for its modern racing usage. In Finland 14-oared churchboats race throughout the summer months, usually on lakes, and often with mixed crews. The largest gathering sees over 7000 rowers mainly rowing the 60 kilometres (37 mi) course at Sulkava[38] near the eastern border over a long weekend in mid July. The weekend features the World Masters churchboat event which also includes a 2 kilometres (1.24 mi) dash.[39]
Yes! The mother of indoor rowing competitions is the CRASH-B Sprints, held annually in Boston. The Charles River All-Star Has-Beens started when the U.S. boycotted the Olympics in 1980 — during the same era that Concept 2 launched their Model A; necessity met opportunity. CRASH-B is still held with aplomb and doesn’t require any special qualification of its applicants.

This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.
×